Install Alpermann drivers

How to install drivers for Alpermann & Velte time code readers

Top  Previous  Next

ISA Card:

1) Run the file "Setup" in the Drivers/PCL folder inside your Titlevision folder.

2) Run Sub Machine. Choose the time code reader address in Setup/preferences/hardware. Default: $240.

 

PCI Card:

1) Run Windows' New Hardware Installation Wizard (from Control Panel - choose Start/Settings/Control Panel)

2) Click "Next" until asked if you want Windows to search for new hardware. Answer NO.

3) When asked for a device, choose "Other Devices" (yellow question mark).

4) When list of devices appear, choose "Have disk".

5) Choose "Browse" and specify the TitleVision folder as path.

6) Choose the file "Pcl-pci.inf".

7) When Windows acknowledges the presence of "PCL-PCI: Timecode Reader Board", click "Next" to install it.

8) Reboot your computer

9) Run Sub Machine. Choose the time code reader address in Setup/preferences/hardware. Default: $240. For a PCI card you have to give the address $1001.

10) Close Sub Machine and run it again for the change to take effect.

11) If there is still a problem, check the file C:\Users\[Username]\AppData\Roaming\Titlevision 2011\Configuration.txt and make sure the value of TimeCardAddress is $1001

 

How to uninstall old driver